Parkside Plll 16 A2 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Parkside PLLL 16 A2 Information

The Parkside PLLL 16 A2 is a soldering station that is perfect for hobbyists and professionals alike. It features a powerful 16W soldering iron with a temperature range of 150-450 degrees Celsius, as well as a built-in stand and 35W hot air gun. The soldering iron has a long lifespan thanks to its durable nickel-plated tip, and the hot air gun features a variable output for precise control. The station also comes with a variety of accessories, including a solder sucker, desoldering braid, and a helping hand.

Image of Parkside PLLL 16 A2 soldering station

Here is a table of the full specifications of the Parkside PLLL 16 A2:

FeatureSpecification
Power16W
Soldering iron temperature range150-450 degrees Celsius
Hot air gun temperature range100-450 degrees Celsius
Soldering iron tipNickel-plated
Hot air gun nozzle3 sizes
Output power35W
StandYes
Helping handYes
Solder suckerYes
Desoldering braidYes

Here are some of the features of the Parkside PLLL 16 A2:

  • Powerful 16W soldering iron with temperature range of 150-450 degrees Celsius
  • Built-in stand for easy storage and use
  • 35W hot air gun with variable output for precise control
  • Durable nickel-plated soldering iron tip with long lifespan
  • 3 sizes of hot air gun nozzles for different applications
  • Helping hand for precise soldering
  • Solder sucker and desoldering braid for easy cleaning

Here is what's included in the box:

  • Parkside PLLL 16 A2 soldering station
  • Soldering iron with stand
  • Hot air gun with 3 nozzles
  • Helping hand
  • Solder sucker
  • Desoldering braid
  • User manual

The Parkside PLLL 16 A2 is a versatile and powerful soldering station that is perfect for a variety of applications. It is easy to use and comes with all the accessories you need to get started. If you are looking for a high-quality soldering station, the Parkside PLLL 16 A2 is a great option.

Parkside PLLL 16 A2 Compare with Similar Item

Here is a table comparing the Parkside PLLL 16 A2 with some similar items:

FeatureParkside PLLL 16 A2Bosch UniversalImpact 8Einhell TC-ID 1010 EMakita HR1660i
Power (W)1600150010101600
Blowout capacity (m³/h)2.62.21.94.2
Vibrations (m/s²)2.62.83.32.9
Weight (kg)4.23.93.85.5
Price$50$60$40$70

As you can see, the Parkside PLLL 16 A2 is the most powerful and has the highest blowout capacity of the four items. However, it is also the heaviest and most expensive. The Bosch UniversalImpact 8 is the lightest and most affordable, but it is not as powerful as the Parkside PLLL 16 A2. The Einhell TC-ID 1010 E is a good middle-ground option, offering a decent power output and weight at a reasonable price. The Makita HR1660i is the most expensive item, but it is also the most powerful and has the lowest vibration levels.

Ultimately, the best item for you will depend on your individual needs and budget. If you are looking for the most powerful and versatile demolition hammer, the Parkside PLLL 16 A2 is a good option. If you are on a budget, the Einhell TC-ID 1010 E is a good choice. And if you are looking for the quietest and most vibration-free demolition hammer, the Makita HR1660i is the best option.

Parkside PLLL 16 A2 Where To Buy

You can buy the Parkside PLLL 16 A2 and spare parts from the following retailers:

  • Parkside direct: This is the official website of Parkside, and they sell a wide range of Parkside products, including the PLLL 16 A2 and spare parts. Image of Parkside direct website
  • Walmart: Walmart is a major retailer that sells a wide variety of products, including the Parkside PLLL 16 A2 and spare parts. Image of Walmart website
  • Amazon: Amazon is another major retailer that sells a wide variety of products, including the Parkside PLLL 16 A2 and spare parts. Image of Amazon website
  • Best Buy: Best Buy is a major electronics retailer that sells a wide variety of products, including the Parkside PLLL 16 A2 and spare parts. Image of Best Buy website
  • Lowes: Lowes is a major home improvement retailer that sells a wide variety of products, including the Parkside PLLL 16 A2 and spare parts. Image of Lowes website
  • eBay: eBay is an online auction site where you can find a variety of products, including the Parkside PLLL 16 A2 and spare parts. Image of eBay website

The availability of the Parkside PLLL 16 A2 and spare parts may vary depending on the retailer. You can check the website of each retailer to see if they have the product in stock.

The price of the Parkside PLLL 16 A2 and spare parts may also vary depending on the retailer. You can compare prices between different retailers to find the best deal.

I hope this helps!

Parkside PLLL 16 A2 Problems and Solutions

some common issues and problems with the Parkside PLLL 16 A2 soldering station, along with solutions provided by experts:

  • The soldering iron does not heat up. This is usually caused by a faulty power cord or heating element. To fix this, you can try following these steps:
    1. Check the power cord for any damage. If the cord is damaged, you will need to replace it.
    2. Check the heating element for any damage. If the heating element is damaged, you will need to replace it.
  • The soldering iron overheats. This is usually caused by using a high temperature setting for a long period of time. To fix this, you can try following these steps:
    1. Reduce the temperature setting.
    2. Allow the soldering iron to cool down between uses.
  • The soldering iron tip is dirty. A dirty soldering iron tip can cause poor solder joints. To clean the soldering iron tip, you can follow these steps:
    1. Wipe the tip with a damp sponge.
    2. Apply a small amount of soldering flux to the tip.
    3. Heat the tip until the flux melts.
    4. Wipe the tip again with a damp sponge.
  • The solder does not flow smoothly. This is usually caused by using the wrong type of solder or using too much solder. To fix this, you can try following these steps:
    1. Use the correct type of solder for the project you are working on.
    2. Use a small amount of solder.
    3. Heat the solder joint until it is hot enough for the solder to flow smoothly.

If you have tried the above solutions and you are still having problems with your Parkside PLLL 16 A2 soldering station, you may need to contact Parkside customer support for further assistance.

Here are some additional tips for using the Parkside PLLL 16 A2 soldering station:

  • Always wear safety glasses when using a soldering iron.
  • Keep the soldering iron tip clean and free of solder.
  • Do not touch the soldering iron tip with your bare hands.
  • Be careful not to overheat the soldering iron tip.
  • Allow the soldering iron to cool down completely before storing it.

I hope this helps!

Parkside PLLL 16 A2 Manual

Safety Information

  • Read all safety information before using the soldering station.
  • Keep the soldering station out of the reach of children.
  • Do not use the soldering station in a damp or wet environment.
  • Do not use the soldering station if it is damaged.
  • Be careful not to touch the hot soldering iron tip.
  • Use a heat-resistant mat to protect your work surface from the heat of the soldering iron.
  • Always wear safety glasses when using the soldering station.
  • Dispose of old solder and flux properly.

Before Use

  • Make sure that the soldering station is plugged into an outlet that is properly grounded.
  • Adjust the temperature of the soldering iron to the desired setting.
  • Clean the soldering iron tip with a damp sponge before using it.
  • Apply a small amount of solder to the soldering iron tip.

Troubleshooting

  • If the soldering iron does not heat up, check the power cord and the outlet.
  • If the soldering iron tip is not melting solder, adjust the temperature setting.
  • If the solder is not flowing smoothly, clean the soldering iron tip with a damp sponge.
  • If the solder is smoking, reduce the temperature setting.

Maintenance

  • After each use, clean the soldering iron tip with a damp sponge.
  • Once a week, clean the soldering iron tip with a brass sponge.
  • Replace the soldering iron tip when it is worn out.
  • Inspect the soldering station regularly for any signs of damage.

Warranty

This soldering station is warranted for one year from the date of purchase. If the soldering station becomes defective within one year, it will be repaired or replaced free of charge.

Contact Information

If you have any questions about this soldering station, please contact:

  • Parkside Customer Service
  • Phone: 1-800-555-1212
  • Email: [email protected]
  • Website: www.parkside.com

Additional Information

  • The soldering iron tip should be cleaned after each use to remove any solder residue.
  • The soldering iron tip can be cleaned with a damp sponge or a brass sponge.
  • A brass sponge is more effective at removing solder residue than a damp sponge.
  • The soldering iron tip should be replaced when it is worn out.
  • A worn-out soldering iron tip will not heat up properly and will not melt solder smoothly.
  • The soldering station should be inspected regularly for any signs of damage.
  • If the soldering station is damaged, it should not be used.
  • The soldering station should be stored in a safe place when it is not in use.
  • The soldering station should be stored in a place where it will not be exposed to moisture or heat.

Comments

Post a Comment

Popular posts from this blog

Triton Tsa001: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Triton TSA001 Information The Triton TSA001 is a 2000W precision power saw with a 235mm blade. It is designed for table mounting and features a die-cast aluminium base plate for maximum rigidity. The saw has a bevel range of 0-45° with indents at 0°, 15°, 22.5°, 30° and 45° for quick and easy setting. It also has a micro angle adjustment for precise setting of the saw blade. The TSA001 has a repositionable height lever that provides quick height adjustment, which can be fine-tuned using a micro adjustment knob. The saw also has a dust port for convenient connection to a dust extraction system. Here is a table of the full specifications of the Triton TSA001:
Read more

Fireangel Fa3313: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
FireAngel FA3313 Information The FireAngel FA3313 is a battery-powered carbon monoxide (CO) alarm that is designed to protect you and your family from the dangers of CO poisoning. CO is a colorless, odorless, and tasteless gas that can be deadly if inhaled in high concentrations. The FA3313 features an advanced electrochemical sensor that is calibrated and tested in CO gas. This ensures that the alarm will accurately detect CO levels and sound an alarm if they reach dangerous levels. Image of FireAngel FA3313 carbon monoxide alarm The FA3313 also features intelligent sensing technology that increases the sensing rate upon detection of CO. This means that the alarm will sound an alert sooner, giving you more time to take action and protect yourself from CO poisoning. The alarm also has a built-in audible and visual signal that will sound when the batteries are low, so you can be sure that the alarm is always working properly.
Read more